To give the surface the effect of a natural glossy travertine stone. For interior and exterior use.
 Usage technology:
 1 layer - Base
 2nd layer - Deep penetration impregnation primer
 3rd layer - Putty
 4th layer - Quartz soil
 5 layer - Decorative plaster
 6 layer - Decorative varnish-glaze
 Technical description:
 Type of material:
 For decorative finishing of walls and ceilings under a natural glossy stone, as well as creating the effect of "cork" on the surface of walls, ceilings, on all prepared surfaces - cement-sand plasters, concrete, gypsum plasterboard, gypsum fiber boards, indoors and outdoors. (offices, stairwells, halls, corridors).
 Structure:
 Water, acrylic dispersion, additives, preservative, fillers.
 Color:
 White
 Density:
 1.87 kg / cm3.
 Gloss level:
 From silky matte to glossy (depends on the method of work).
 Application:
 metal spatula, plastic paste
 Properties:
 Easy to apply, easy to structure, elastic, climate-resistant, solvent-free, pigmented, odorless.
 Surface preparation:
 Substrates must be clean, dry, sound and load-bearing. Absorbent and crumbling substrates must be primed with Kaizer "Putzdgrundharter 1: 4". Before application, treat the substrate with Kaizer quartz primer to improve adhesion to the substrate.
 Application procedure:
 On a carefully prepared base, apply a layer of white or tinted material with a metal paste, then use a paste or a spatula to create a stone pattern (with a broach). After drying, after 6-8 hours, the surface is sanded and polished with a spatula. Then wax is applied, tinted in the desired color and immediately polished with a metal spatula. For exterior work, instead of wax, we use a tinted varnish, Kaizer's Effect Lasur
 Tool cleaning:
 With water, immediately after use, if necessary with the addition of detergents.
 Storage:
 12 months. Store in a cool, dry, frost-free place.
 Packing:
 4 kg; 8 kg; 15 Kg
 Consumption:
 1.2 - 1.5 kg / m2, depending on the structure of the base. The most accurate determination of consumption is a test application on site.
 Drying time:
 At a temperature of + 20C and an air humidity of 65%, subsequent layers can be applied after 12 hours. Drying times are longer at lower temperatures and higher humidity.
 Processing temperature:
 +5 C minimum for the base and atmosphere during application and drying. Avoid drafts during application, as it dries quickly, there is a risk of cracking.
 Tinting:
 White. Computer tinting (by machine) or by hand using colors for water-based paints.
 Precautions:
 Keep out of the reach of children. Avoid contact with skin and eyes, otherwise rinse immediately with water. In order to protect the environment, do not discharge into water bodies, soil or sewers.
 Disposal:
 According to local regulations