top of page

For interior work. Velvety pearlescent paint for decorative finishes. Resistant to abrasion and washing.

Usage technology:

1 layer - Deep penetration primer-impregnation

2nd layer - Putty for interior work

3 layer - Pigmented primer paint

4th layer - decorative finish

Technical description:

Type of material:

Pearlescent paint for decorative finishing.

Structure:

water, acrylic dispersion, pearlescent pigment, filler, preservative.

Color:

gold

Gloss level:

silky glossy.

Density:

1.4 g / cm3.

Application:

Brush, roller, sponge, plastic spatula, etc.

Application:

Suitable for application on all prepared mineral substrates (concrete, cement plasters, gypsum plasterboards, etc.), as well as previously painted walls and ceilings with water dispersion paints. This product is intended for general use (residential, office, etc.).

Properties:

For a silky-glossy finish, abrasion and wash resistant, odorless, economical. As a top coat with a velvety fabric effect.

Surface preparation:

Prepared surface clean from dust, process primer paint «Putzgrundierfarbe weiss» Kaizer brand, on the need for a primer paint to add color to the tone "Veluor" to obtain uniform color bases.

Operating procedure:

Stir well before application. Apply the paint to the prepared surface with a brush or roller. To create decorative patterns, a brush, plastic spatula, sponges, fur "gloves", etc. are used. To apply the first layer, dilute the paint with water by 10-30%, depending on the desired result and allow to dry for 8-10 hours. To apply the 2nd layer and create a decorative pattern, apply the paint undiluted, in small areas, approximately 1-2 m², using a brush or roller. At the same time, without allowing to dry, with light movements (with a brush, or a spatula, etc.), form the desired pattern in any direction. Does not require the use of additional coatings.

Cleaning tools:

rinse with water immediately after use.

Consumption:

300 g / m2.

Storage:

Not lower than + 5 ° С

Packing:

1kg, 3kg, 5kg.

Drying time:

At t + 20 ° С at least 8-10 hours between layers. Complete drying 24 hours.

Processing temperature:

+ 20оС, relative humidity of air and base 65%.

Precautions:

Keep out of reach of children. In case of contact with eyes, flush with plenty of water. Do not empty into drains.

Disposal:

according to local regulations

SUN SERIES Velor Silver - Decorative finishes

₸12,375.00Price
1 Kilogram
    Логотип с белым фоном.png

    Наш адрес: Астана, ул. Абая 7, здание Строймарта, Отдел KAIZER 

    unnamed.png
    • 8 (701) 982-26-11

    bottom of page