top of page

Interior latex paint. Resistant to abrasion. Super washable.

Type of material:

Latex acrylate paint for the formation of durable, abrasion-resistant matt coatings on walls and ceilings with increased operational load (walls of staircases and landings, halls, offices, corridors, etc.) Ideal for painting on fiberglass, coarse fiber and structural wallpaper, surfaces made of concrete, plaster and plaster, as well as surfaces made of wood in the indoor sector. Suitable for use in rooms with high humidity (rooms with pools, bathrooms, dressing rooms).



Gloss level:



Water, synthetic latex dispersion, titanium dioxide, fillers, additives, preservative.


Approximately 1.5 g / cm3.


By brush, roller, airless spray (nozzle from 0.026-0.031 inches = 0.66-0.79 mm; pressure 6-8 atm., Spray angle 40-80 °)


Resistant to abrasion and washing, including with detergents. Easy to handle, good and long-lasting. The paint dries evenly and without stains. It covers heavy dirt the first time. Applying undiluted paint using a textured roller creates a slightly smooth surface. Has a high vapor permeability.

Substrate preparation:

Kaizer Matt Latex Paint can be applied to all solid substrates, they must be clean, dry and hard. Old glue whitewash must be completely removed. Apply Kaizer Putzgrundharter 1: 4 Primer or Kaizer Putzgrundfarbe White Primer Paint to fresh cement-based plaster and repaired areas. Observe the relevant processing rules.

Painting procedure:

1st (priming) coat: thin the paint with a maximum of 10% water.

2nd (final) coating: do not thin if possible.

When painting, make sure that the material is applied evenly.


Any water-dispersive color of the Kaizer brand.

Cleaning tools:

Rinse with water immediately after use.


In a cool and dry place, protected from frost. In tightly closed manufacturer's packaging, storage stability is guaranteed for approximately 12 months.


1 kg, 7.5 kg, 15 kg, 25 kg.


130-150 g of paint in one layer is enough for about 1 m2, on rough surfaces and on glass fiber, respectively, more, about 180-200 g / m2. The most reliable method of accurately establishing the flow rate is a test painting.

Drying time:

At room temperature around + 20 ° C, re-coating is possible on the same day. At colder temperatures, accordingly withstand a longer drying time.

Processing temperature:

+ 5 ° C minimum for substrate and atmosphere during application and drying.


Keep out of reach of children. In case of contact with eyes, flush with plenty of water. Do not empty into drains.


According to local regulations.

Matt latex paint. "Mattlatex" super washable

1 Kilogram
    Логотип с белым фоном.png

    Наш адрес: Астана, ул. Абая 7, здание Строймарта, Отдел KAIZER 

    • 8 (701) 982-26-11

    bottom of page