top of page

For interior and exterior use. Strengthens the foundations. Prevents efflorescence from reaching the surface. Reduces and evens out the absorption of the surface. Resistant to washing off. Weatherproof. Ready to use.

Usage technology:

1 layer - Means for flushing efflorescence

2nd layer - Protective agent against efflorescence

Technical description:

Type of material:

A product for protecting the surface from efflorescence for work in the indoor and outdoor sector.

Structure:

Water, synthetic acrylic dispersion, additives, preservative.

Color:

Milky white, colorless upon drying.

Density:

Approximately 1.0 g / cm3.

Application:

By brush, roller, airless spray (nozzle 0.021 to 0.026 inches or 0.53 to 0.66 mm; pressure 6-8 bar; spray angle 40-80 °).

Application:

A means for creating a barrier that prevents salts from escaping to the surface from the thickness of the mineral base.

Properties:

Excellent penetrating power. It strengthens impregnated substrates very well. Forms a protective barrier that prevents efflorescence from escaping to the surface. Permeable to water vapor, resistant to alkalis. Dries quickly and is almost odorless.

Substrate preparation:

Substrates must be strong, dry, clean and capable of bearing the load.

Compatibility:

With all Kaizer dispersion paints and synthetic renders.

Application procedure:

It is applied with a brush, roller or brush. On highly absorbent substrates, apply until full saturation "wet background" without thinning. The product should not form a shiny film.

Cleaning tools:

With water, immediately after use.

Storage:

In a cool and dry place, protected from frost. Store opened packaging tightly sealed. Storage stability in tightly closed original packaging is approximately 12 months.

Packing:

1 l, 5 l, 10 l.

Consumption:

Approximately 150 g / m2, depending on the absorbency of the substrate. The most accurate method of setting the flow rate is a test application.

Drying time:

At least 3-5 hours. In warm, dry air, the treated surface can be painted on the same day, in cooler and damp air, respectively, later.

Processing temperature:

+ 5 ° C minimum for substrate and atmosphere during processing and drying.

Precautions:

We ask you to observe the following recommendations: Exclude the access of children to the substance. Do not breathe vapor when spraying. Ensure sufficient air intake during processing and drying. In case of contact with skin or eyes, rinse immediately with plenty of water. Do not empty into drains, water reservoirs or onto the ground.

Disposal:

According to local regulations.

Protective agent against efflorescence - Antisol

₸1,585.00Price
1 Kilogram
    Логотип с белым фоном.png

    Наш адрес: Астана, ул. Абая 7, здание Строймарта, Отдел KAIZER 

    unnamed.png
    • 8 (701) 982-26-11

    bottom of page